Class I Biosafety Cabinet

Aeromech™ Class I Biosafety Cabinet is designed for operator and environment protection from materials hazardous for operator’s health. The operation is based on the forced removal of hazardous substances from the working zone through the air up-flow, with high-effective air filtration and its exhaust into the environment. Working with 2 agents, there is no risk of their cross-contamination owing to unidirectional (laminar) air up-stream. Although the Class I cabinet protects the operator and the environment from exposure to biohazards, it does not prevent samples being handled in the cabinet from coming into contact with airborne contaminants that may be present in room air. All Class I biological safety cabinets are suitable for work with microbiological agents assigned to biosafety levels 1, 2 and 3.

1 Product Aeromech make Class I Biosafety Cabinet
2 Air balancing 0% recirculation.100% exhaust
  Protection Personnel & Environmental protection
3 MOC Galvanized Iron with Powder coated / Stainless Steel – Satin Finish
  Exhaust Filter HEPA Filter having EU 13 rating with suitable size.
4 Efficiency 99.99% down to 0.3 Microns.
  Pre Filter Aeromech® make, EU 4 rating with suitable size.
5 Efficiency 90% down to 10 Microns.
6 Inflow Velocity Minimum 100% from the front opening
7 Illumination Of Light Optimum.
8 Noise Level Less than 70 db 'A'.
9 Vibration Level Minimum.
  Instrumentation  
10 Magnehelic Differential Pressure Gauge 01 No. (make : Dwyer, USA) with each unit 
(To measure differential pressure across the supply HEPA filter).
11 Motor Blower Assembly Statically & Dynamically balanced with suitable rating and size.
(Induction motor with centrifugal blower) A Mounting unique spring suspension system to take care
of vibration and noise.
12 White Lights Lights through white acrylic cover to get maximum light intensity.
13 3 Pins Switch & Socket 15 AMPS - 1 set in each unit.
14 Other Switches On/Off switches for motor blower & CFL lights.

Aeromech™ Class | BSCs provide personne and es i S&S 4 environmental protection, but does not provide product protection. It is similar in terms of air movement to a chemical fume hood. However the Class | BSC has a HEPA filtration system that handles the air exiting the unit, providing protection for the environment.

Aeromech® The Class I biological safety cabinet is an open-front negative pressure cabinet The exhaust air from the cabinet is filtered by a high-efficiency particulate air (HEPA) filter. The Class I biosafety cabinet will provide personnel and environmental protection, but not product protection.