
Aeromech builds powder dispensing booths, powder sampling booths and de-dusting booths at our two factories in Chennai, at Gerugambakkam and Paraniputhur. Each booth uses G4, G6 and H14 filtration and controlled downflow to keep powder away from the operator, with an ISO Class 5 work zone.
Pharma, API and nutraceutical plants around Chennai get the booth built to their room size, installed by our own technicians and validated by our NABL-accredited team, all from one local company.
Cleanroom Systems Installed
Over Two Decades of Industry Experience
Cleanroom Equipment & Technical Services
Installation, Calibration & Maintenance







A powder dispensing booth, also called a downflow booth or reverse laminar airflow booth, is an enclosure for weighing, dispensing and charging powders. Filtered air flows down across the work zone and carries airborne powder away from the operator’s breathing zone, while slight negative pressure stops dust escaping into the room.
Aeromech builds the full reverse laminar airflow range: powder dispensing booths for weighing and charging, powder sampling booths for raw-material sampling, and de-dusting booths for cleaning tablets and containers.
Aeromech Powder Dispensing Booth models are used for:
The booth should be sized from the powder’s hazard assessment, the quantity handled and the equipment placed inside.
G4, G6 and H14 filters capture airborne powder in stages before air returns to the work zone.
Vertical downflow at about 0.45 m/s (90 FPM) carries powder away from the operator's breathing zone.
About 10% of the air is exhausted to keep the booth under negative pressure, so powder does not escape into the room.
The working area is designed for ISO Class 5 as per ISO 14644-1.
Double-skin PUF-filled panels give a clean, enclosed structure with an SS304 work area.
A built-in PAO port supports HEPA filter integrity testing, with differential-pressure gauges showing filter loading.
Aeromech supplies, installs and services Powder Dispensing Booth across Chennai and nearby industrial areas, including:
Need Powder Dispensing Booth elsewhere in India? See our Powder Dispensing Booth range for India.
Registered Office: #3/1760, F-5, Srisudharsan Flat, Bell Nagar, Madanandapuram, Mugaliwakkam, Chennai – 600125 · +91 73586 47600
Factory Unit 1: 7A, Multi Industrial Nagar, Gerugambakkam, Chennai – 600128 · +91 95002 14900
Factory Unit 2: #8/64, Dhanabakiyam Street, Krishnaveni Industrial Estate, Paraniputhur, Chennai – 600122 · +91 94450 64312
Factory visits by appointment: +91 73586 47600
| Specification | Dispensing Booth Information |
|---|---|
| Range | Powder dispensing, powder sampling and de-dusting booths |
| Airflow principle | Reverse laminar airflow / vertical downflow |
| Air balance | 90% recirculation / 10% exhaust |
| Protection | Product, personnel and environment |
| Cleanliness | ISO Class 5 as per ISO 14644-1 |
| Downflow velocity | About 0.45 m/s (90 FPM) |
| Filtration | G4 / G6 / H14, three stages |
| Body | PU-coated GI or satin-finish stainless steel |
| Work area | IS 304 stainless steel, satin finish |
| Side panels | Double-skin, PUF-filled |
| Noise | Less than 70 dB(A) |
| Light | Minimum 500 lux in the work area |
| Monitoring | Differential-pressure gauges, PAO test port |
| Dimensions | According to the approved drawing |
Depending on the approved model, a standard Powder Dispensing Booth includes:
A Powder Dispensing Booth is the right choice wherever powders are weighed, sampled or charged and the operator, product and room all need protection from airborne dust.
In and around Chennai, it is used by:
For Chennai orders, our engineers review the powder, batch size and equipment that will sit inside the booth, then confirm the working size at your site. Booths are built in Chennai and installed at your plant by our own technicians. After installation, our NABL-accredited team can run PAO filter integrity, air velocity and particle count tests and issue the validation report.
Each Powder Dispensing Booth can be configured according to:
Aeromech has installed 3000+ cleanroom systems since 2002, including powder dispensing booths for pharma clients with Chennai operations such as Fourrts India.
Every Powder Dispensing Booth project in Chennai follows the same six steps, from requirement review at your site to testing and handover.
We review the application, material type, required work area, project location and preferred configuration.
Aeromech recommends a suitable product configuration based on the information provided.
The selected dimensions, materials, components, options and documentation are confirmed before manufacturing.
The cabinet is manufactured and inspected according to the approved product scope.
The product is delivered to the agreed location. Installation and commissioning services can be included where applicable.
Applicable testing, documentation and operator guidance can be provided according to the order scope.
Powder Dispensing Booth price depends on the booth size, construction material, filtration stages, airflow capacity, flameproof requirement, monitoring options and installation scope.
Find answers to common questions about Powder Dispensing Booth in Chennai
A powder dispensing booth is a reverse laminar airflow enclosure for weighing and dispensing powders. Filtered downflow carries airborne powder away from the operator while negative pressure keeps it inside the booth.
Both use the same reverse laminar airflow principle. A dispensing booth is sized for weighing and charging batches, while a sampling booth is usually smaller and used for taking raw-material samples.
Three stages: G4 pre-filters, G6 intermediate filters and H14 HEPA final filters, with differential-pressure gauges and a PAO test port.
About 90% of the air is recirculated and about 10% is exhausted, which keeps the booth under slight negative pressure.
Yes. Flameproof electricals can be specified where the powder or solvent hazard assessment requires it.
Yes. Aeromech builds powder dispensing, powder sampling and de-dusting booths at our Gerugambakkam and Paraniputhur factories in Chennai.
Yes. You can visit our Gerugambakkam or Paraniputhur factory by appointment to check the build and filtration before the booth is dispatched. For appointments, call or WhatsApp +91 73586 47600.
Yes. Our technicians assemble the booth at your Chennai plant, and our NABL-accredited team can test HEPA filter integrity, air velocity and particle count and issue the validation report.
Yes. We build powder sampling booths and de-dusting booths on the same reverse laminar airflow principle, sized to your process and room.
We supply and install across Chennai and nearby pharma belts, including Sriperumbudur, Oragadam, Maraimalai Nagar, Gummidipoondi, Thervoy Kandigai, Sri City, Vellore and Puducherry.
We evaluate the intended application, operating environment and technical requirements before recommending equipment configurations.
Established in Chennai in 2002, Aeromech has nearly 24 years of experience in cleanroom equipment manufacturing and contamination control services.
Aeromech provides cleanroom equipment manufacturing alongside validation, calibration and testing services, allowing customers to address related requirements through one company.
Aeromech supplies cleanroom and laboratory equipment across major Indian locations.
Installation, commissioning and applicable performance testing can be included in the project scope.
Maintenance, filter replacement, performance testing and other applicable support are available after installation.
Our dedication to innovation allows us to provide solutions that not only meet but exceed the expectations of our clients.
We trust Aeromech for clean room solutions; their service enhanced our lab’s performance and maintained high cleanliness standards.
Production Head
Aeromech’s clean room engineering service significantly improved our workspace safety and efficiency, providing reliable solutions that meet all our lab requirements.
Chief surgeon